I just had IQANdesign 7.02 crash

I changed to a display page and started to zoom in to see the text better

Then it popped up the regular dialog box to make a bug report. The display page was still resizing slowly in the background

Before I had time to fill the text in the program exited completely including the bug report box

The message was something about "Illegal floating point" in some QT library

How do we flash IQANDesign application to ECU? What all hardware connection we need? Do we have any flashing procedure document available?

Hello, 

I am facing issues working with IQANSimulate control.xlsm file. I receive compilation error when I try to browse the project file. Is this due to incompatibility in IQAN Simulate version vs the reference the VBA uses ?

I was using SVG file for the startup graphic. It worked fine until update 7.02.20.9286. It started showing the Parker Logo. I tried deleting and re-importing. It showed imported and connected to the master module startup image, but still the Parker Logo showed at startup. So, I ended up changing the file type to PNG. This worked. Are SVG files no longer supported for startup images?

Making use of J1939 > COMPID enabled and J1939 > SOFT enabled on the MC43 with IQAN 6.08.24.8136 . Have encountered an issue where the Transport Protocol Data Transfer (PGN 60160) is occurring at too fast of a rate.

It was observed that the data packets for the COMP ID and SOFT ID messages is being transmitted at a rate of ~540us. The J1939-21 standard indicates a minimum of 50ms between packets.

This fast rate is causing issues with the receiving device, in particular handling the SOFTID as in this case it is 11 packets. The COMPID (5 packets) is being handled for the most part.

Is there a way that the Transport protocol packet rate can be set, or is this truly an issue in the firmware?

I am having trouble uploading an .idax project file to a multi-master bench test system (two MD4-7). Electrically, the two modules are connected to 12VDC and each other via a diagnostic CAN-A connection. I am connected to the computer via ethernet and C3 port. The series of events was as follows:

1. Various uploads during initial testing were successful and allowed me to develop the system.
2. After ~>1 week of uploads, the errors began. Error is as follows:
   1. Send project to device, select device as recognized by IQANdesign
   2. MD4 screens go blank and sometimes show Parker Logo
   3. Sometimes a blue screen (Attached image) flashes (~0.5s freq) on headmaster MD4 for ~30s
   4. IQANdesign popup shows "Sending project to system, No reply from master module"
   5. Then MD4s revert to previous program
3. After a weekend of not touching the MD4's, a program was successfully uploaded a single time, but has not worked since then
4. Programs can be uploaded to isolated MD4s, but cannot be uploaded when the two are linked via the diagnostic CAN-A connection.
5. Issue persists to empty project with just two MD4-7's and diagnostic port CAN link, and using different CAN ports for the diagnostic line.

Whenever I delete a state in a finite state machine that has state trasitions connected, it crashes IQAN design. If I delete all the state transitions first, it will allow me to delete it without crashing. 

I want to be able to use 'constants' in my IQAN read from a file, for example perhaps using the same control system across multiple vehicles but having some vehicles with a lost maximum speed. One way I would use in other systems is a vehicle configuration file to rad the values from. 

I saw the 'variant option selector' which sounded like it might be part way there but it complains it wants n option group and I have no idea how that works never mind if it is the right thing to use

i check the project it gets to 90% a wait and then a  crash

i am guessing if it cannot get past that it will not upload

i sent all the crashes to parker by answer yes to send it in.

I really need to extract logs from the clone file directly to avoid unnecessary trip to customer to try to retrieve just the log file.

I have only clone file with logs because they could get that in the field without IQANRun freezing. 6.08

One log is big and it takes ages to load the clone file in the IQANRun. IQANRun informs many times during opening that it seems that the application is frozen and offers to close it.

I can get the clone file loaded just by continuing the opening even when the IQANRun states that it is frozen.

Same is true when trying to receive log file from the machine in the field. It takes ages and informs multiple times that the application is frozen, but I think if you just push continue it will eventually get the log.

Why it takes soooo long and how do I get the logs out from the clone file?